Menu
Filter By
FIXED BLADE KNIVES
-
![Bread Knife SE]()
Bread Knife SE
$79.90Spyderco Bread Knife Serrated Edge with Black handle. Features a 10 1/4" fully serratedblade of premium MBS-26 stainless steel that is meticulously heat treated and ground exceptionally thin for optimum cutting performance. Handle is Black polypropylene thas is direct injection molded onto the tang of the blade. The handle has a distinctive "stepped" texture pattern that provides comfort and control during use. 15 1/2" overall. Hand wash and dry recommended. SEKI CITY -
![Szabo Warrior Hawk D2]()
Szabo Warrior Hawk D2
$412.50This Laci Szabo designed Spyderco Warrior Hawk features a single piece body of durable D2 tool steel finished with a black titanium carbonitride (TiCN) coating. The head is compound ground with a spike on the back of the head. Machined black G-10 handles provide a sound and secure grip. There is also incorporated into the handle a stout pry tip. Comes with a custom-molded Boltaron carry sheath and arrives packaged in a padded zipper pouch. Tiawan -
![Yojimbo 2 Black BLK Blade PE]()
![]()
Yojimbo 2 Black BLK Blade PE
$232.50This Michael Janich Design Yojimbo features a 3 1/4" matte black DLC coated plain edge blade of CPM S30V stainless steel. Compression lock. Back G-10 handles. BlackStainless pocket clip. Drilled and tapped on all four corners for tip-up, tip down left or right side carry. All black hardware. 4 1/2" closed. USA -
![TDI LDK Neck Knife]()
TDI LDK Neck Knife
$16.99KaBar TDI LDK Ankle/Neck Knife. Black powder coated stainless steel. Lace in boots, pin inside a belt or lapel, or hang around neck. Hard plastic friction sheath. Black 550 cord included. No bigger than a credit card. -
![Combat Kukri]()
Combat Kukri
$79.97This heavy-duty chopper gets it's shape from it's older sibling, the Kukri Machete. At about 80% the size of the larger version, the Combat Kukri performs just as well at clearing brush and small tree limbs. It's smaller profile makes it a little easier for toting around - at just shy of a pound, it's a more appropriately sized tool for combat carry as well. SPECS: Weight: 0.80 lb. Steel: 1095 Cro-Van Measurements: Blade length 8-1/2"; Overall length: 13-3/8" Grind: Flat Edge Angles: 20 Degrees Handle Material: Kraton G® HRC: 56-58 Stamp: USA Butt Cap/Guard: Powdered Metal Blade Thickness: 0.165 Knife made in USA Sheath made in PRC
-
![Zoomer]()
![]()
Zoomer
$420.00This Thomas Zoomer designed Spyderco fixed blade features a 5 1/4" zero ground hamaguri (convex) edge blade of CPM-20CV stainless steel. Machined black G-10 handle scales over a full length tang that exposes a hammer surface. The handle is thoughtfully designed to work well in the hand for long periods and features an extended shelf on spine of blade that provides additonal leverage when required. Leather belt sheath with ceramic sharpening rod and accessory pouch. 10" overall Taichung -
![Ka Bar TDI Serrated]()
Ka Bar TDI Serrated
$43.97TDI LAW ENFORCEMENT KNIFE KB02-1481 Designed by a Officer for Officers, by John Brenner, Founder of Tactical Defense Institute. Designed to be worn with a duty belt, concealed behind it, A last ditch weapon for Police Officers. -
![Becker/Reinhardt Kukri]()
Becker/Reinhardt Kukri
$169.97The Becker/Reinhardt Kukri is a labor of love designed and perfected with Ethan Becker and the Reinhardt Estate. Made from 0.188" thick 1095 Cro-Van steel, the kukri's 13.25" epoxy powder coated blade is proudly embellished with Hank Reinhardt's signature and coupled with Becker's distinct handle shape and a practical polyester sheath. Becker Knives "Work for a living".
SPECIFICATIONS:--WEIGHT: 1.4 lb--BLADE LENGTH: 13.25 inches--OVERALL LENGTH: 18.75 inches--EDGE ANGLES: 20 Degrees--SHAPE: Kukri--TANG STAMP: KA-BAR/BK&T--KNIFE MATERIAL: Black 1095 Cro-Van--GRIND: Flat--HANDLE MATERIAL: Ultramid®--ROCKWELL HARDNESS: 56-58--BLADE THICKNESS: 0.188 inches--BLADE WIDTH: 2.375 inches--KNIFE: USA --SHEATH: PRC
-
![Ka-Bar Machete Cutlass]()
Ka-Bar Machete Cutlass
$69.50Ka-Bar 02-1248 Cutlass Machete with Sheath.
Perfect for chopping down weeds, clearing a camp site or cutting small limbs and tree branches. Sold with a Black Hard Plastic/Cordura® sheath.
SPECIFICATIONS:--WEIGHT: 1.1 lb--BLADE TYPE: Fixed Blade--BLADE LENGTH: 11 inches--OVERALL LENGTH: 16.5 inches--SHAPE: Cutlass/Khukri--TANG STAMP: KA-BAR--KNIFE MATERIAL: Black SK5--GRIND: Hollow--HANDLE MATERIAL: Black TPR--ROCKWELL HARDNESS: 52-54--BLADE THICKNESS: 0.165 inches--BLADE WIDTH: 2.375 inches --Taiwan
-
![Ka-Bar U.S. Army Fighting...]()
Ka-Bar U.S. Army Fighting...
$89.50Ka-Bar 1219 U.S. Army marked partially serrated fighting knife.
The traditional KA-BAR marked for Army personnel and featuring a partially serrated edge to aid in cutting synthetic and looped materials. Tang stamped U.S. ARMY. U.S. Army stamped leather sheath included.
SPECIFICATIONS:--WEIGHT: 0.7 lb--BLADE TYPE: Fixed Blade--BLADE LENGTH: 7 inches--OVERALL LENGTH: 11.875 inches--EDGE ANGLES: 20 Degrees--SHAPE: Clip Point--TANG STAMP: U.S. ARMY--KNIFE MATERIAL: Black 1095 Cro-Van--GRIND: Flat--HANDLE MATERIAL: Stacked Leather--ROCKWELL HARDNESS: 56-58--BUTT CAP/GUARD: 12GA Commercial Grade Carbon Steel--KNIFE MANUFACTURED IN: United States--SHEATH MANUFACTURED IN: Mexico--BLADE THICKNESS: 0.165 inches--BLADE WIDTH: 1.188 inches
-
![Spyderthrower Large]()
Spyderthrower Large
$116.20Designed by Canadian custom knifemaker Harald Moeller in collaboration with Spyderco, this three knife set is right on target. Each of the three knives in the large set are 11" long and 0.217" thick. The two tone blade is made of 8Cr13MoV stainless steel. Comes with a triple tiered leather sheath. PRC
-
![Z-Cut PE Pointed Red]()
Z-Cut PE Pointed Red
$25.50Spyderco Z-Cut Offset Kitchen Knife with Pointed Plain Edge CTS-BD1N Stainless blade and Red Polypropylene Handles. The USA made Z-Cut series of kitchen knives from Spyderco offers lightweight performance for most any utility job in the kitchen. The no - nonsense design keeps the knife affordable, but the high quality blade steel and polypropylene handle provides a high quality knife. SPECIFICATIONS: --Blade Steel: CTS-BD1N Nitrogen-enriched Stainless Steel --Blade Grind: Flat --Blade Edge: Plain --Blade Point: Pointed --Handle: Red Polypropylene --Blade Length: 4 3/8: --Overall Length: 8 3/4" USA -
![Z-Cut PE Pointed Green]()
Z-Cut PE Pointed Green
$25.50Spyderco Z-Cut Offset Kitchen Knife with Pointed Plain Edge CTS-BD1N Stainless blade and Green Polypropylene Handles. The USA made Z-Cut series of kitchen knives from Spyderco offers lightweight performance for most any utility job in the kitchen. The no - nonsense design keeps the knife affordable, but the high quality blade steel and polypropylene handle provides a high quality knife. SPECIFICATIONS: --Blade Steel: CTS-BD1N Nitrogen-enriched Stainless Steel --Blade Grind: Flat --Blade Edge: Plain --Blade Point: Pointed --Handle: Green Polypropylene --Blade Length: 4 3/8: --Overall Length: 8 3/4" USA -
![Z-Cut PE Pointed Black]()
Z-Cut PE Pointed Black
$25.50Spyderco Z-Cut Offset Kitchen Knife with Pointed Plain Edge CTS-BD1N Stainless blade and Black Polypropylene Handles. The USA made Z-Cut series of kitchen knives from Spyderco offers lightweight performance for most any utility job in the kitchen. The no - nonsense design keeps the knife affordable, but the high quality blade steel and polypropylene handle provides a high quality knife. SPECIFICATIONS: --Blade Steel: CTS-BD1N Nitrogen-enriched Stainless Steel --Blade Grind: Flat --Blade Edge: Plain Edge --Blade Point: Pointed --Handle: Black Polypropylene --Blade Length: 4 3/8: --Overall Length: 8 3/4" USA -
![Santoku PE Black]()
Santoku PE Black
$86.70The Spyderco Kitchen Knife Series has been resurrected utilizing their original MBS-26 blade steel. This Santoku Japanese butcher's knife features a thin, flat ground straight edge MBS-26 stainless blade. The steel was chosen specifically by Spyderco for kitchen use as it has proven edge retention, sharpness and excellent cutting performance. A comfortable black Sermollan handle is affixed and has both vertical and horizontal channels for a positive grip. Blade length: ~7". Overall length: 12" Seki City -
![Paring Knife Red SE]()
Paring Knife Red SE
$45.90Spyderco Kitchen Paring Knife. Features a 4 1/2" flat ground satin serrated edge blade of MBS-26 Stainless. Red Sermollan handle is a lightweight rubberized plastic with a semi-soft texture to provide a secure grip even when wet. 9" overall. Seki City
